Chapter 8 Trouble Shooting; Normal Phenomena - Haier BD-103GAA Service Manual

Hide thumbs Also See for BD-103GAA:
Table of Contents

Advertisement

SERVICE MANUAL
Model: BD-103GAA

Chapter 8 Trouble shooting

8-1. Normal phenomena

Temperature control in OFF or
Freezer does not
Min or 0 position.
operate or
Freezer is unplugged.
Power-On Light is
The fuse is blown/circuit
not on
breaker is tripped.
Door/lid left open.
Freezer
Too frequent or too long to
starts/stops too
door/lid openings.
frequently
Temperature control set too
cold.
Door/lid left open.
Too frequent or too long
door/lid openings.
Temperature control set too
Freezer operates
cold.
too long
Inadequate air circulation
space around cabinet.
Fast Freeze switch is in the
ON position (on some
models)
Floor may be weak, causing
freezer to vibrate when
Noisy operation or
compressor is on.
cabinet vibrates
Cabinet is not positioned
solidly on floor
Door/lid left open.
Freezer
temperature too
Too frequent or too long
warm
door/lid openings.
Temperature control OFF or
Foods defrosting
Min or 0 positions.
Issue 2009-12-17
Rev.
Move the control to a temperature setting.
Push the plug completely into the outlet.
Replace fuse or reset the breaker
Check to see if package is holding door/lid
open.
Reduce the time of opening the door/lid
See About the operation of the freezer
Check to see if package is holding door/lid
open.
Reduce the time of opening the door/lid
See About the operation of the freezer
See Preparing to install the freezer
See About the operation of the freezer
Placing 2 X 4s (51 mm X 102 mm) under the
length of the freezer will help support it and
may reduce vibration.
See Preparing to install the freezer Or use
shims for uneven floor
Check to see if package is holding door/lid
open.
Reduce the time of opening the door/lid
Move the control to a temperature setting.
Ref0912S015V0
18

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents