Panasonic GAS PLASMA DISPLAY Setup Manual page 2

INTRODUCTION
Welcome to the Gas Plasma Display setup guide. This document contains
information necessary to configure a new Gas plasma display for use as VDT display
device.
In this document you will find the following:







OUT OF BOX INSPECTION GUIDE
Check over the outside of each box and make note of any damage that may have
occurred during shipping. Report any damage to the Warehouse immediately!
Open the box containing the Display. Note the boxes will need to be reused for
shipping the display so keep all packaging material.
Check each box for the following accessories.
NEC
PANASONIC
SETUP AND TESTING FOR OUT OF BOX TEST
To perform an OBT on the display a video feed from a VDT running Web Show will
be required for correct image adjustment. Connect a COAX video feed from the
VDT into the Video Input of the display (BCLC –HD15-02 VDT Video cable).
Connect the supplied AC power cable and power the unit on. Use the provided
diagram to locate the connections on each display.
Out of Box inspection guide
Set up and testing for out of box test
Diagram of Panasonic Connections
Diagram of NEC Connections
Menu Settings guide for Panasonic Displays
Menu Settings guide for NEC Displays
Packing and Shipping components
Operating Instructions Book (English)
Remote Control Transmitter (RP-109)
Batteries (AAA Battery X 2)
AC Power cord
Operating Instructions Book (English)
Remote Control Transmitter (EUR646529)
Batteries (AA Battery X 2)
AC Power Cord
British Columbia Lottery Corporation
74 West Seymour Street Kamloops, BC V2C 1E2
Lottery Technical Serviceswww.bclc.com
2