Ml/Mts; Menu; Back - JVC I'Art 0805JGI-II-IM User Manual

Button Functions

ML/MTS

MTS technology allows several audio signals to be broadcast in analog at once, giving you a
choice in what you wish to hear with a TV program. In addition to mono or stereo sound, an
MTS broadcast may also include a second audio program (SAP).
Press the ML/M
By every press of the M
the mode
Notes:
• When you are receiving a digital broadcast, if there are other languages, you can change the
language by pressing the M
• Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo
mode even if a certain broadcast is in mono sound only.
• Choose the mono setting to reduce excessive noise on a certain channel or broadcast.
• Selecting SAP will allow you to hear an alternative soundtrack, if one is available.
• MTS unavailable if your television's Input source is in input 1, 2, 3 or 4 mode, as described
on page 52.
• ML/MTS will not work when you are using the Digital-In.
• You can also change the mode by pressing the π † buttons.

Menu

The Menu button allows you to access JVC's onscreen menu system. Press M
the onscreen menu system.
• See individual topics like "Sound Adjust" for specific information on using menus.
OK
This button confirms your selection when you are in one of the onscreen menus.

Back

This button allows you to go back in the menu to change a selection or correct a mistake.
60
button
TS
/M button, you change
L TS
/M button.
L TS
STEREO
ON AIR
ON AIR
MONO
to activate
ENU
MTS
SAP