Auto Tuner Setup - JVC I'Art 0805JGI-II-IM User Manual

Quick Setup

Auto Tuner Setup

In auto tuner setup, the TV automatically scans through all available channels, memorizing the
active ones and skipping over blank ones or channels with weak signals. This means when you
scan (using the C
HANNEL
AUTO TUNER SETUP
TUNER MODE
START
SELECT OPERATE
NOW
PROGRAMMING !
When the setup is finished, "THANK YOU ! SETUP IS NOW COMPLETE" is displayed. Your
quick setup is now complete. You can now begin watching your television, or you can continue
on in this guide for more information on programming your remote control, or using the
JVC onscreen menu system to customize your television viewing experience.
Notes:
• If you want to cancel the Auto Tuner Setup, press the M
• Noise muting will not work during Auto Tuner Setup.
• If you choose SKIP, it finished without doing the Auto Tuner Setup.
Cable Box and Satellite Users: After your auto tuner setup is complete, you may, (depending
on the type of hookup), have only 1 channel, usually 3 or 4 in the auto tuner memory. This is
normal.
STOP
22
+/– buttons) you will receive only clear, active channels.
è
AIR
†
After Analog Auto Tuner Setup is finished, Digital Auto
Tuner Setup starts.
EXIT
MENU
48
The Quick Setup is complete
To choose CABLE or AIR (or SKIP when you
skip AUTO TUNER SETUP)
To START
ENU
Plug-In Menu
Now Programming...
20
button.