Samsung 8500 Series User Manual page 119

I
Securing the TV to the Wall
(depending on the model)
Caution
Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang
over or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries or death. Follow all safety
precautions provided on the included Safety Flyer. For added stability, install the anti-fall device fbr safety purposes, as
follows.
• Accessaries
Holder-TV
~
Screw
CD
(M4 X L16)
~
Screw Q) (M8 XL19)
~
• To prevent the TV from falling (According to the TV type, see drawing annex)
1. Unscrew a screw attached on the back of your TV, then connect the Holder-TV
[CD
or Q)) with the screw through the hole.
lEI Make sure to only use the supplied screws.
lEI When you install the wall-mount, refer to the "Securing the TV to a wall or Cabinet" in the TV manual for installation type.
, - - - - - - - - [©
Type] - - - - - - - - - - - ,
[@Type] [® Type]
2. Firmly fasten the screws to the wall or cabinet where the TV is to be installed. Tie the TV-Holder attached to the TV and the screws
fastened on the wall or cabinet so that the TV is fixed.
lEI Purchase the screws to be used on the wall or cabinet separately.
lEI Install the TV close to the wall so that it does not fall.
lEI When attaching the TV to the wall, tie the cord level with the ground or slanted downwards for safety purposes.
lEI Confirm that the cord or link does not come loose frequently.
lEI Before moving the TV, separate the connected cord first.
Wall
lEI Use the Wood screw (sold separately) from the size M4 X L20.
3. Verify all connections are properly secured. Periodically check connections for any sign of fatigue or failure. If you have any doubt
about the security of your connections, contact a professional installer.