Epson Stylus Photo 1290 User Manual page 57

Apply watermarks. The watermark that you select will be
displayed on the previewed image. For detailed information
on customizing watermarks, see "Making the Watermark
setting" on page 3-38.
Specify which pages in the document you would like to print
using the Add and Remove features. To add or remove a page,
click the page icon in the list at the left side of the preview
window. Then, add or remove it using the commands on the
Print Options menu. The Print Options menu commands are
as follows.
Add page
Remove
page
Note:
When using the double-sided printing feature, the Preview window
allows you to toggle between pages in a print job by clicking the
appropriate page in the list at the left side of the screen. The pages
are listed in two columns, Front and Back. The pages in the Front
column will print first. The page numbers listed refer to pages of the
print job and may contain more than one document page.
If it is necessary to reprint part of a double-sided print job, select
each page of the print job that does not need to be reprinted in the
list at the left side of the screen, then click Remove Page on the
Print Options menu. Make sure that the paper is loaded properly so
that the print job will start on the correct side of the correct page.
After you have previewed the document, click Print to print the
document, or click Cancel to cancel printing.
Click this button to add the highlighted
pages to the list of pages to be printed.
Click this button to remove the highlighted
pages from the list of pages to be printed.
Printing with Windows
3-19