Epson Stylus Photo 1290 User Manual page 119

No Margins Check this box when you want to print with no margins.
Sheet Feeder :
Select this to leave no margins on full side of the paper.
This option is available only when printing with paper
that is in the Paper size list.
Roll Paper:
Select this to leave no margins on full side of the roll
paper. This option is available only when printing with
paper that is on the Paper size list.
You can use the following media with this feature.
(Available paper sizes vary depending on your printer
model.)
Photo Paper:
Super A3/ Super B*, A3*, Panoramic, A4, Letter, 4 x 6"
(No Perforations), 100 x 150 mm
Matte Paper-Heavyweight:
Super A3 / Super B*, A3*, A4, Letter
Index Card:
5 x 8"
* only with the EPSON Stylus Photo 1290.
Note
If your application has margin settings, make sure they
are set to zero before printing.
When using this feature with Roll Paper, you need to
use your image-editing software to make the image
4mm wider than the roll paper.
Printing with this feature selected takes longer than for
normal printing.
Because this feature enlarges the image to a size
slightly larger than the paper size when Sheet Feeder
is selected as the Paper Source setting, the portion of
the image that extends beyond the edges of the paper
will not be printed.
Print quality may decline in the top and bottom areas of
the printout, or the area may be smeared when printing
on media other than that listed above. We recommend
printing a single sheet to check quality before printing
large jobs.
You cannot use this feature with the following media:
Photo Quality Glossy Film, Ink Jet Transparencies, Iron-
On Cool Peel Transfer Paper, Ink Jet Back Light Film,
360 dpi Ink Jet Paper.
5-21
Using the Printer Software for Macintosh