Download Print this page

Error Codes - Electrolux T4300S Operating Manual

Hide thumbs

Advertisement

16

Error codes

The tumble dryer has automatic error indication.
Error indication is displayed as a flashing code.
Please refer to the manual Selecta Control from ver. 4.xx for an explanation of error
codes.
A service technician must be contacted should an error be displayed.
The user can, however, try to correct some error codes himself.
Error code E05 or E06
When the error code E05 or E06 is displayed,this can be due to the motor being too hot.
Stop the dryer and wait for 5 minutes. Start again and choose a program. If this does not
help and the error code reappears a service technician must be contacted.
Error code E12
When the error code is displayed this can be due to the user having overfilled the dryer
with clothes that are too wet.
Remove some of the clothes, close the door, and press the start button. If this does not
help and the error code reappears a service technician must be contacted.
Error code E14
When resetting gas error the dryer must be in operation on a program with heat, and the
heat indicator must be on.
The dryer must only be reset three times.
If the dryer, however, has to be reset more than three times it has to be put out of order
and a service technician must be called.
Error code E15
When the error code is displayed this can be due to the user having overfilled the dryer.
Remove some of the clothes, close the door, and press the start button. If this does not
help and the error code reappears a service technician must be contacted.
Error code E16
The error code is displayed if the user presses the start button while the air pressure
switch is already activated.
Resetting by opening / closing the door and pressing start button.
Operating manual

Hide quick links:

Advertisement

loading