Connecting To A Dvd Player; Connecting To An External Amplifier - JVC AV-27D800 User Manual

1 C O N N E C T I O N S
0

CONNECTING TO A DVD PLAYER

1) Connect green cable out from DVD player "Y" component output, in to TV "Y" component input.
2) Connect blue cable out from DVD player "P
3) Connect red cable out from DVD player "P
4) Connect white audio cable out from DVD Left audio output, in to TV Left Audio Input 2.
5) Connect red audio cable o u t f rom DVD Right audio output, i n to TV Right Audio Input 2.
Green, blue and red are the most common colors of DVD cables. Some models may vary cable colors,
please consult the user 's manual for your DVD player for more information.
Be careful not to confuse the red DVD cable with the red audio output cable. It is best to complete one set
of connections (DVD or audio output) before starting the other to avoid accidentally switching the cables.
Please set the COMPONENT-IN on the Initial Setup Menu to "YES" whenever you connect a DVD player.

CONNECTING TO AN EXTERNAL AMPLIFIER

1) White audio cable out from TV Left Audio output jack, in to Amplifier [Left] input.
2) Red audio cable out from TV Right Audio output jack, in to Amplifier [Right] input.
NOTE: A) Set the TV Speaker to OFF (page 42), switch the audio output to VARI (page 42), and adjust
the sound with the TV remote's V
" component output, in to TV "P
B
" component output, in to TV "P
R
button.
OLUME
" component input.
B
" component input.
R