Specifications - Makita KP0810 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Shiplapping depth
No load speed (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
DOUBLE INSULATION
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for planing wood.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
For Model KP0810
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Model
Planing width
Planing depth
-1
)
Overall length
Net weight
Safety class
equipment and
environmentally compatible
) : 88 dB(A)
pA
) : 99 dB(A)
WA
KP0810
16,000
3.3 kg
END201-5
Uncertainty (K) : 3 dB(A)
Vibration
The vibration
determined according to EN60745:
Work mode : planing softwood
Vibration emission (a
Uncertainty (K) : 1.5 m/s
For Model KP0810C
Noise
its
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Vibration
ENE001-1
The vibration
determined according to EN60745:
ENF002-1
Work mode : planing softwood
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
ENG102-3
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
2
KP0810C
82 mm
4 mm
25 mm
12,000
290 mm
3.4 kg
/II
Wear ear protection
total value (tri-axial
2
) : 3.0 m/s
h
2
) : 82 dB(A)
pA
) : 93 dB(A)
WA
Wear ear protection
total value (tri-axial
2
) : 3.5 m/s
h
2
ENG222-2
vector sum)
ENG102-3
ENG222-2
vector sum)
ENG901-1