Advertisement
overview
SNV-6012M Overview
important Safety inStructionS
Thank you very much for purchasing our Cameras and Lenses.
1. Read these instructions.
Please follow the procedures outlined in this guide for
2. Keep these instructions.
changing out the lens on the SNV-6012M and SNV-6013
3. Heed all warnings.
cameras.
4. Follow all instructions.
5. Do not use this apparatus near water.
The procedure will be different for each camera.
6. Clean only with dry cloth.
7. Do not block any ventilation openings, Install in accordance with the manufacturer's
Please take care not to touch the glass parts on the lenses
instructions.
after removing the protective coverings.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
For the SNV-6012M, when removing the included lens, you will
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
find the lens has a black metal washer and a spring-washer.
plug has two blades with one wider than the other. A grounding type plug has two
Take care not to misplace the washers as you will need them
blades and a third grounding prong. The wide blade or the third prong are provided for
your safety. If the provided plug does not fit into your outlet, consult an electrician for
for the new lens installation.
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/ accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lighting storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the
Utilize the same two washers in the same order to mount the
apparatus has been damaged in any way, such as power-supply cord or plug is
lens. (The Nylon washer included with the new lens will not be
damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
needed for the SNV-6012M)
English _3
Advertisement
