Panasonic JS-170FR Series Service Manual page 115

(3) Press (21,16) to recover the screen of [***** TEST #11 Touch Panel Test.*****].
***** TEST # 11 Touch Panel Test. *****
2. TOUCH TEST
ENTER 1 (OK) or (NG)
Test done. Press any key._
(4) Enter "0-ENTER" through the keyboard to obtain the test program screen.
(5) Select "Primary Master [****MB]" by using [↑] or [↓] key on the keyboard.
Note: "NG" is shown as a result of the calibration test with the touch panel for a model onto which the application has not
been installed. Accordingly, determination whether the result of the calibration test is OK or NG should be made
according to the touch panel test after the calibration test.
Calibration: OK = Touch panel test: OK
Calibration: NG = Touch panel test: NG
The calibration data is cleared when turning off the power because the data is not saved on the disk.
LCD DISPLAY
OK
3-31