Midi - Korg A4 Guitar Owner's Manual

3.MIDI
The A4 Guitar features capabilities for transmitting and receiving MIDI program change messages as well as MIDI dump and load operations.
Saving All Program Parameters (MIDI Dump)
1. Connect the MIDI OUT of the A4 Guitar to the MIDI IN of a MIDI
data filer.
MIDI IN
a MIDI data filer
2. Set the external device to receive MIDI data.
3. In the Edit utility mode, select a MIDI channel for transmitting
MIDI data.
(:(:):)
' s '
I l-
#0
4. With the MIDI channel lit in the display, press the Write switch.
The Value display changes to read "tr" (transmit) as the effect
program parameters are transmitted.
0000000
0000000
0000000
0000000
WRITE
Press
5. The MIDI channel indication reappears in the display again upon
completion of transmission.
10
Loading All Program Parameters
1. Connect the MIDI IN of the A4 Guitar to the MIDI OUT of a MIDI
data filer.
MIDI IN
r
I
MIDI OUT
a MIDI data filer
2. In the Edit utility mode, select a MIDI channel for receiving MIDI
data.
ATTACK
()..7
GAIN
0..15
MID fREQ
1-16
PITCH
·12-12
DElAY TIME
()..3 lOrm
DElAY TIME
0..75ms
REVERS TIME
h
(:(:):)
' s '
I l-
#0
3. With the MIDI channel lit in the display, transmit the data to the A4
Guitar from the external device. The Value display changes to
read "rc" (receive), as the effect program data is automatically
loaded.
4. The MIDI channel indication reappears in the display again upon
completion of the loading process.
NOTE: It is not possible to save or load program parameters if there
is no MIDI channel visible in the display. Please select a
MIDI channel (as described above) before saving or load-
ing MIDI data. Also, the MIDI channel setting must be the
same as when the data was originally sent.