Offsets - RadioLink AT10 Instruction Manual

10-channel radio control system
Hide thumbs Also See for AT10:
Table of Contents

Advertisement

Adjustability:
• Position: -100% to +100%, with a default of -50% (off), +50% (on)
• Channel: Spoiler 1: ch8, or 3 (ch8 or 3*), Spoiler 2: NULL, or 3 (NULL or ch3*)
• Elevator setting: Rate: -100% to +100%, Delay: 0% to 100%
• SWITCH A-H fully assignable. Also LOGIC SW (Lsw1 to 3) may be assigned. Set up LOGIC SW : See p. 26.
GOAL of EXAMPLE:
2-servo spoiler mode.
Adjust the spoiler servo position to
60% .
Where next?

OFFSETs

Unnecessary fusulage motion is generated when there are sudden changes in the servo position and variations in the
operating time between channels can be suppressed by using the delay function ( -dly- ).
NOTE: The same delay amount for elevator and rudder is recommended when using V-tail function.
START , SPEED , DISTANCE and LANDING ) These offset trims have same setting abilities basically except the switch and dial
assignment. For an example of trim settings, please see the following:
Adjustability:
condition.
• SWITCH G (AT10) or E (AT10) is programmed for NORMAL , START, and SPEED
trims. SWITCH C is programmed for DISTANCE and LANDING trims. These
• TRIM item (Digital trim operation mode):
STEPS:
Open the SPOILER MIX function and
move to 2nd page.
Activate the function.
Assign the SPO2-CH . (Ex: CH3)
Adjust the spoiler servo position.
(Ex: SPO1 SPO2 = +55% to +60% )
Optional: Set the elevator rate.
(EX: 10% )
Optional: Set the delay. (EX: 25% )
Close menu.
Set up BUTTERFLY mixing: see p. 68.
These additional flight conditions contain different offset trims to make the
saiplane perform certain maneuvers more easily. Aileron differential functions
may be set to provide separate rates per condition selected.
Prior to setting up OFFSET , you must active the conditions and assign the
switches in the CONDITION/FUNCTION .
CONDITION/FUNCTION )
65
* GLID (2A+2F) mode
INPUTS:
for 1 second. (If BASIC ,
C
to SPOILER MIX .
C
to MIX .
to ON .
to SPO2-CH .
to CH3 .
C
to +50% . ( SPO1 )
C
C
to +50% . ( SPO2 )
C
to rate - ELE .
to 10% .
C
to dly - ELE .
to 25% .
again.)
to +60% .
to +60% .
NORMAL ,

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents