Introduction To The At10 - RadioLink AT10 Instruction Manual

Note that in the text of this manual, beginning at this point, any time we are using a feature's specialized name or
abbreviation as seen on the screen of the AT10, that name, feature, or abbreviation will be exactly as seen on the radio's
screen, including capitalization and shown in a DIFFERENT TYPE STYLE
on the radio itself, such as moving SWITCH A, KNOB VR(B), or the THROTTLE STICK, those words will be displayed
as they are here.
TRANSMITTER:
• Large graphic liquid-crystal display panel with 2 buttons, a cursor lever and a turn-and-press Dial for quick, easy setup.
• All transmitters include all 3 aircraft types with specialized programming for each, including:
• Airplane ( ACRO )
• V-TAIL
• ELEVON
• AIRBRAKE
• Helicopter (8 swashplate types, including CCPM, see page 93)( HELI )
• 3 Idle Ups
• Revo. Mixing
• Delay
• V-TAIL
• ELEVON
• OFFSET (5 conditions)
• BASIC menu for quick, easy set up of less complex models.
• ADVANCE menu for more complex, unique setups.
• Four electronic TRIM LEVERS for rapid yet precise trim adjustment - no remembering to "store trims" between models
and no more "bumped trims" during transport.
• IDLE- DOWN ( ACRO ), THR-CUT ( ACRO HELI ) (engine shut off), and MOTOR CUT ( GLID
control for taxi and landings.
• New stick design with improved feel, adjustable length and tension.
• Triple rates available by setting dual rates to 3-position switches.
• Eight SWITCHES, 3 DIALS and 2 SLIDERS; completely assignable in most applications.
• Trainer system includes the "functional" ( FUNC ) setting, which allows the student to use the AT10's mixing, helicopter, and
other programming functions even with a 4-channel buddy box.
• AT10 transmitter features airplane friendly switch layout, with the trainer switch at the left hand (Mode 2), and a notched
throttle to minimize throttle changes with rudder input. Defaults to ACRO model type.
• AT10 transmitter features helicopter-friendly switch layout, with idle-up and throttle hold switches at the left hand, and a
smooth, ratchet-less (unsprung) throttle for perfect hovering. Defaults to HELI ( H-1 swashplate type) model type.
• Change transmitter mode from mode 2 to modes 1, 3, or 4. (See P. 17)
A QUICK INTRODUCTION TO THE AT10 SYSTEM
• Twin Aileron Servos ( FLAPERON and AIL-DIFF )
• Twin Elevator Servos ( AILEVATOR )
• Snap Roll (4 separate directions available)
• Throttle and Pitch Curves per Condition
• Gyro Mixing including Separate Settings per Condition
• Governor Mixing
GLID 1AIL+1FLP 2AIL+1FLP 2AIL+2FLP )
• Twin Ailerons ( FLAPERON and AIL-DIFF
• Crow ( BUTTERFLY
5
• Gyro Mixing