Advertisement
10 10
Cleaning the nozzle
Disconnect the nozzle from the tube. Use the hose han-
dle to clean the nozzle.
Cleaning the motorized nozzle
Always disconnect the nozzle before cleaning it !
Open brush roll cover by pushing the latches. This will
free the front wheels for cleaning.
If the wheels are stuck, clean them by removing the
wheel cap (only at the AeroPro nozzle) with a small
screwdriver.
Pull out the brush roll and remove entangled threads by
snipping them away with scissors. Use the hose handle
verse order.
If the wheels are stuck, remove them carefully by using
a small screwdriver.
-
Hide quick links:
Advertisement
