Sony PVM-741 Operating Instructions Manual page 29

right, bottom right and bottom left. The central area of
the image is automatically framed when you select
NATIVE.
To select a display area
1
Press the function button to which the SCAN
function is assigned and select NATIVE.
The central part of the image will be displayed.
2
Turn the menu selection control to select the area to
magnify. The areas you select will be toggled in the
following order (turning the control in a clockwise
direction).
Center Top Top
(default) left right
Note
Changing input signals or formats automatically
sets the magnified area to the center (default).
3
To return to standard viewing mode, press the
function button again.
CLOSED CAPTION SETTING
USER CONFIG – CLOSED CAPTION SETTING
C L O S E D C A P. :
T Y P E :
7 0 8 :
6 0 8 :
C A P T I O N L E V E L :
Submenu Setting
CLOSED CAP. Select ON to display closed caption
and OFF not to display.
Bottom Bottom
right left
xxx
xxx
xxx
xxx
xxxx
Submenu Setting
TYPE Sets the closed caption display
type.
• AUTO1: Select this to display
• AUTO2: Select this to display
• 708: Select this to display 708*
• 608(708): Select this to display
• 608(VBI): Select this to display
*1 708 is a closed caption signal
*2 608(708) is a closed caption
*3 608(VBI) is a closed caption
708 Sets the closed caption type for
708. Select from SERVICE1 to
SERVICE6.
608 Sets the closed caption type for
608(708) and 608(VBI). Select
from CC1, CC2, CC3, CC4,
TEXT1, TEXT2, TEXT3 and
TEXT4.
CAPTION LEVEL Sets the luminance of the displayed
characters. Select LOW or HIGH.
Note
You can change the setting only
when SDI signal is input.
AUDIO SETTING
USER CONFIG – AUDIO SETTING
S D I AU D I O S E T T I N G :
3 G / H D / S D :
S P E A K E R O U T P U T :
3
automatically 608(VBI)*
when SD-SDI signal is
input, or to display
1
automatically 708* when
HD-SDI signal is input.
3
automatically 608(VBI)*
when SD-SDI signal is
input, or to display
2
automatically 608(708)*
when HD-SDI signal is
input.
1
when HD-SDI signal is
input.
2
608(708)* when HD-SDI
signal is input.
3
608(VBI)* when SD-SDI
signal is input.
conforming to the EIA/CEA-
708 standard.
signal conforming to the EIA/
CEA-608 standard, and which is
transmitted as EIA/CEA-708
standard.
signal conforming to the EIA/
CEA-608 standards, and which
is transmitted as Line 21.
xxx
xxxxxx
Adjustment Using the Menus
29