Auto Tuner Setup - JVC AV 27530 User Manual

Quick Setup
Step 3 – Auto Tuner Setup
JVC's onscreen menu system lets you set your television up to meet your own personal viewing
preferences. The menu screens and their features are discussed in detail in this book. The menu
settings are optional, you can set as many or as few of them as you wish. But to begin watching
your television right away you will need to run the Auto Tuner Setup. This lets your television
learn the channels it is able to receive. To run the Auto Tuner Setup follow the steps below.
Press the Menu button on the remote control
π †
To AUTO TUNER SETUP
è
To operate
è
To choose CABLE (if you are connected to a cable system) or AIR (if you use an
antenna)
π †
To move to START
è
To start Auto Tuner Setup
The Auto Tuner will now memorize all of the clear, active channels your television can receive.
This will take one or two minutes.
When the setup is finished, PROGRAMMING OVER ! is displayed. Your quick setup is now
complete. You can now begin watching your television, or you can continue on in this guide
for more information on programming your remote control, or using the JVC onscreen menu
system to customize your television viewing experience.
Cable Box and Satellite Users: After your auto tuner setup is complete, you may, (depending
on the type of hookup), have only 1 channel, usually 3 or 4 in the auto tuner memory. This is
normal.
STOP
>
I N I T I A L S E T U P
A U T O T U N E R S E T U P
T U N E R M O D E
S T A R T
S E L E C T B Y
O P E R A T E B Y
NOW
PROGRAMMING !
48
The Quick Setup is complete

Auto Tuner Setup

C A B L E
E X I T B Y
E X I T
15