Installation; Install The Sim Card, Memory Card And The Battery - Doro PhoneEasy 620 User Manual

Doro phoneeasy 620 mobile phone user manual
Hide thumbs Also See for PhoneEasy 620:
Table of Contents

Advertisement

IMPORTANT!
Turn off the phone and disconnect the charger before removing the
battery cover.

Install the SIM card, memory card and the battery

The SIM and memory card holders are located inside the battery
compartment.
1
1.
Remove the battery cover and the battery if it is already installed.
2.
Optional: Insert the memory card into the slot under the SIM card
holder. Make sure that the memory card contacts are facing inwards
and push the card in, until you hear a click. Take care not to scratch
or bend the contacts on the card. To remove or replace the card,
push the card in until you hear a click and then pull the card out.
3.
Insert the SIM card by gently sliding it into the holder. Make sure
that the SIM card's contacts are facing inwards and that the cut off
corner is pointing downwards. Take care not to scratch or bend the
contacts on the SIM card.
4.
Insert the battery by sliding it into the battery compartment with the
contacts facing downwards to the right.
5.
Replace the battery cover.
IMPORTANT!
Use only compatible memory cards for use with this device. Compatible
card type: microSD, microSDHC.
Incompatible cards may damage the card itself, the device and corrupt
data stored on the card. Depending on the market some phones may
have a pre-installed memory card.
English (US)

Installation

2
3
4
1
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Phoneeasy 520x

Table of Contents