Bluetooth - Doro PhoneEasy 620 User Manual

Confirm with "0"
When the assistance function is activated the phone dials the first num-
ber on the list. If the call is not answered within 25 seconds, the next
number is dialled. Dialling is repeated 3 times or until the call is an-
swered, or until
You can enable the Confirm with "0" function. If the receiver doesn't
press 0 within 60 seconds the call will be disconnected and the next
number in the sequence will be called. If the receiver presses 0 within
60 seconds, the call is confirmed and no further call attempts will be
made (assistance sequence interrupted). To enable set the function as
On.
Signal type
Select the notification signal type for the assistance sequence.
1. Press Menu
2. Select Signal type:
•
High to use loud signals (default).
•
Low to use one low signal.
•
Silent no sound indication, like a normal call.
3. Press OK to confirm.
Alarm info
Please read the important safety information before enabling the assis-
tance function:
1. Press Menu
•
Be careful about including numbers with automatic answering
in the call list, as the alarm sequence stops once the call is
answered.
2. Press Back to return.
Note! This information is not applicable if Confirm with "0" is set to On.
®

Bluetooth

IMPORTANT!
When you are not using Bluetooth connectivity, select Function on/off/
Off or Visibility/Off. Do not pair with an unknown device.
English (US)
is pressed by the user.
Settings Assistance.
Settings Assistance
37
Alarm info: