Completing The Installation - Motorola ASTRO APX O2 User Manual

2-52
2.8

Completing the Installation

Complete the installation by connecting the speaker to the accessory cable; verify the ignition sense
wire is attached according to planned ignition sense; attach the accessory cable into J600; verify the
control head is attached to either the TIB or the CAN extension cable; and then attach the power
cable to the back of the transceiver.
Table 2-11. Serial Number with Radio Band/Tier/Power
6 APX6500 HighPower
7 APX Low Tier Portable
8 APX Low Tier Mobile MP
9 APX Low Tier Mobile HP
Standard Configurations Completing the Installation
6878215A01