Clock & Alarm; Set Date And Time; Set Alarm; Set Alarm Melody - Motorola D1001 User Manual

6. Clock & Alarm
If you subscribe to your network's Caller Identification service, the time on your D1000 may be set
automatically each time you receive a call, depending on your network provider.
You can also set or adjust the time using the Clock & Alarm menu.

Set date and time

m d
1. Press and scroll to CLOCK/ALARM. Press
m
.
2. Enter the date using the format DD/MM e.g.
m
3. Press and enter the time using the 24 hour format HH:MM,
e.g. 14:45 for 2:45pm.
m
4. Press to confirm.
>
5. Press to return to standby.

Set alarm

m d
1. Press , scroll to CLOCK/ALARM and press
d m
2. Scroll to SET ALARM and press .
u d
3. Scroll or to OFF, ON ONCE or ON DAILY and press
4. If you select ON ONCE or ON DAILY, enter the time using the 24 hour format
m
2:45pm and press .
>
5. Press to return to standby. When the alarm goes off, press any key to stop the ring.
NOTE
Once the alarm is set to on, the icon is displayed.
The alarm will ring at the medium level. ALARM ON

Set alarm melody

There are three alarm ringtones.
m d
1. Press and scroll to CLOCK/ALARM.
m
Press .
d m
2. Scroll to ALARM TONE and press .
- Melodies are played.
u d m
3. Scroll or and press .
16
m
. Display shows DATE & TIME, then press
04/ 08 for 4th August.
m
.
m
.
HH - MM e.g 14:45 for
and the will flash on the display.

7. Personal settings

Handset tones

WARNING
When the phone is ringing, avoid holding the earpiece too close to your ear as it may damage your
hearing.

Ring volume

Choose from: Ringer Off, Low, Medium, High, Boost and Progressive (increasing ring volume).
NOTE
The default setting is High.
m d
1. Press , scroll to PERSONAL SET and press
m
2. HANDSET TONE is displayed. Press .
m
3. RING VOLUME is displayed. Press .
u d
4. Scroll or to adjust the ringer volume level.
m
5. Press to save the settings.
>
6. Press to return to standby.

Ring melody

Choose from 10 ringer melodies.
m d
1. Press , scroll to PERSONAL SET and press
m
2. HANDSET TONE is displayed. Press and scroll
u d
3. Press or to select the ringtone.
- A sample of the ringtone is played.
m
4. Press to confirm.
>
5. Press to return to standby.

Group melody

To benefit from this feature, you must subscribe to the Caller Line ldentification service.This menu
enables you to select and set the melodies to be played when there is an external incoming call
from a contact whose name is stored in your phonebook and is part of a group. You can associate
1 ring melody to each group. There are three phonebook groups (Group A, B, C) available for you
to organize your contacts. Each group can be assigned a unique melody.
m d
1. Press , scroll to PERSONAL SET and press
m
2. HANDSET TONE is displayed. Press and scroll
u d
3. Scroll or to select: GROUP A, B or C, then press
u d
4. Press or to select the ringtone you want for the group and press
>
5. Press to return to standby.

Key tones on/off

When you press a key on the handset you hear a beep. You can switch these beeps on or off.
m d
1. Press , scroll to PERSONAL SET and press
m
2. HANDSET TONE is displayed. Press and scroll
u d
3. Scroll or to select ON or OFF.
m
.
m
.
d m
to RING MELODY. Press .
m
.
d m
to GROUP MELODY. Press .
m
.
m
.
m
.
d m
to KEY TONE. Press .
Clock & Alarm