Rear Panel - Motorola VIP1002E Installation Manual

Rear Panel

The following illustration shows the rear panel of the VIP1002E.
Key Item
1 Power
2 Reset
3 Video Out
4 HDMI
5 USB
6 Digital
Audio
7 Ethernet
VIP1002E Installation Guide
Figure 2: Rear Panel
Function
Connector for the DC power adapter.
Reboots the VIP1002E, and resets all functions to the
original factory settings. Use only when directed by service
provider personnel.
SCART video output to a TV, VCR, or other device.
Connects to a high-definition TV or home theater receiver
with an HDMI input (for a DVI input use an HDMI-to-DVI
adapter).
USB 2.0 connector.
Digital S/PDIF audio connection.
RJ-45 network connection for digital signal from your
service provider.
Note: There are two Ethernet LEDs, one for Link and one
for Activity. The Link LED illuminates when an Ethernet
cable is plugged into the VIP1002E set-top box and the
Ethernet network is up. The Activity LED blinks whenever
traffic is transmitted or received on the Ethernet interface.
2