User Guide
→ Front Side
Attach a screw in position A and A', adjust the rail length and secure the screws. Use
position D if necessary.
IMPORTANT: Make sure to securely tighten all the
screws adjusting the rail length.
7. Fix both outer rails using large screws (for each outer rail: two at the front and two at the
rear). On the front side, secure screws only in the center holes.
NOTES:
Check that the rails are level.
8. Secure the screws loosened in step 4 to fix the sliding bracket.
NOTES: Center the middle part (1) on the guide rail
assembly before securing the screws.
9. Enlist the help of at least two one person to hold the unit and mount it securely in the
rack.
A
D
(1)
35
www.nec-computers.com
A'