Table of Contents
Advertisement
User Guide
Installing to / Removing from Rack
Install the Disk Expansion Unit to the rack (the removal procedure is described below). If you
purchased the built-in option sold separately, first install the option to the Disk Expansion Unit.
Observe the following instructions to use the NEC Express server
safely. Failure to follow these instructions may cause a fire, personal
injury, or property damage. Refer to the Safety Notes section for
more information.
specified.
Checking the Installation Components
Make sure that the following components are provided to install the Disk Expansion Unit into the
rack.
M5 Screw (Large size)
(12)
CAUTION
Do not lift the Disk Expansion Unit by yourself.
Do not install the Disk Expansion Unit in any place other than
Do not pinch your fingers with mechanical components.
Do not use the handle or the front bezel to lift the unit.
Guide rail assembly
Countersink Screw (Small size)
(18)
Washers
(12)
31
www.nec-computers.com
Captive nuts
(12)
Advertisement
Table of Contents
