System Summary; Product Data; Devices And I/O Ports - Mitsubishi Electric Apricot LS 550 Owner's Handbook Manual

Computer
Table of Contents

Advertisement

System Summary

This page cannot be edited, but gives a summary of the system main
settings. Changes made in other pages will be reflected here. Make a
note of the information on this page before you progress any further
or make any changes.

Product Data

This page cannot be edited, it gives details of the Machine
Type/Model and the System Serial Number.

Devices and I/O ports

Serial ports A & B (COM1 & COM2)
This allows you to select the I/O ports and interrupts used by the
two serial ports. It is best to leave these at the default settings. Do
not disable the serial ports unless you are absolutely sure you are not
going to need them.
Port B will be greyed out on those systems which are provided with
an infra-red remote receiver.
Parallel port
This allows you to set the I/O port and interrupt used by the
parallel port. You can select Standard or Extended port modes. To
get EPP mode you may have to change the I/O port setting.
Parallel Port Mode
Standard
Extended
Bi-directional
EPP
ECP
S y s t e m B I O S a n d S e t u p
Description
Used for output only.
Simple two-way data.
Enhanced Parallel Port mode.
Extended Capabilities Port mode.
LS/VS 550 OWNER'S HANDBOOK
B/5

Advertisement

Table of Contents
loading

Table of Contents