9. Secure the card by replacing all the screws/clamps that you
removed in Step 5.
10. Connect any necessary signal cables to the card. If the card that
you are installing makes use of the ATI Multimedia Channel
(AMC) connector then you need to connect the ribbon cable to
the AMC/VFC connector on the motherboard. Please refer to
Appendix A, 'Inside the computer' for further details.
The AMC connector forms a subset of the VFC and has additional
pins for supporting multimedia modes. Be extremely careful when
connecting the ribbon cable to the AMC/VFC connector. Some of
the pins carry power and any improper use can result in damage to
the upgrade board.
11. Check to ensure no other cables or connectors have become
dislodged and replace the system unit cover.
12. Read the manuals supplied with the card and follow any other
installation requirements, such as software etc.
E x p a n s i o n C a r d s
LS/VS 550 OWNER'S HANDBOOK