Erase Guard - Sanyo ICR-B5000 Instruction Manual

ERASE GUARD

Erase guard functions to pre-
vent accidental erasure.
1. Press and hold the
MENU/FOLDER button
down at least 2 seconds
in the stop mode.
(See "Selecting the
menu" on page 9.)
2. Press the MENU/FOLDER button repeatedly to select "ERASE
GUARD".
3. Press the TIME/SET button.
• "OFF" blinks.
ERASE
GUARD
OFF
4. Press the + or – VOLUME button to select "ERASE GUARD ON".
• " " appears on the display.
5. Press the TIME/SET button to set it.
• " " remains lit.
Note:
If the ERASE button is pressed after setting Erase Guard, "GUARD" ap-
pears briefly on the display.
MENU/
FOLDER
ERASE
+ VOLUME –
TIME/SET
24