Dividing A Track (Divide) - JVC XM-228BK Instructions Manual

Dividing a track (DIVIDE)

A track can be divided into desired number of tracks by adding track markings in the
middle, in the desired points or where you want to search later.
This makes it possible to assign track numbers after recording medley music or FM
broadcast. The track numbers after the divided track are incremented automatically.
1 Press EDIT on the main unit or the TITLE/EDIT on the
remote control unit to select "DIVIDE".
TITLE
/EDIT
The DIVIDE indicator lights up.
or
Each press of the button switches the editing functions as follows.
• When TITLE/EDIT on the remote control unit is used, the disc title is displayed
after "ALL ERASE".
2 Press SET on the main unit or the remote control unit.
SET
or
3 Play the track to be divided.
Using the jog dial or 4 or ¢:
or
Select the track number by turning the
jog dial on the main unit or 4 or ¢
on the remote control unit.
Then, Press 6 on the main unit or 3
or
on the remote control unit.
Using the numeric keys:
Select the track number with the numeric keys on the remote control unit. The selected
track is repeatedly played.
To select a track, see "Selecting a track with the numeric keys" on page 9.
4 Press SET when a point where you want to divide the
track comes.
"POSITION" is displayed and the
SET
track marking fine-adjustment display
or
appears.
• When the track has been divided as desired, go to step 6.
• If the track has not been divided as desired, fine-adjust the track marking position.
Go to step 5.
If you notice that the selected track number is wrong, press 7STOP/CANCEL on
•
the main unit or CANCEL on the remote control unit and repeat from step 3.
DIVIDE JOIN MOVE
MD total playing time display (Disc title)
ALL ERASE
ERASE
Blinks
Blinks
Blinks
Example)
When track No. 3 is selected
Blinks
Example) Track Nos. 3 and 4 blink and the
4-second section from the divided point
will be played repeatedly.
1 2 3 4 5
6
Blinks
1 2 3 4 5
6
Blinks
1 2 3 4 5
6
Blinks
1 2 3 4 5
6 7
Increments by 1
19