Before Using For The First Time; Installing The Unit; Connecting To Other Equipments - JVC XL-V130BK Instructions Manual

BEFORE USING FOR THE FIRST TIME

Installing the unit

Best location
Select a location which is level, dry and neither too cold nor too hot
(temperature range 5°C (41°F) to 35°C (95°F)). Also, avoid dusty
locations or any location subject to vibration.
If interference occurs
If this equipment is placed near a tuner or a radio receiver tuned to AM
frequencies, interference may occur. If this happens, we recommend
either that you move this unit as far away as possible from the tuner or
receiver or briefly turn off the power to this unit.
Connecting to other
equipments
Connecting to an amplifier or receiver allows you to listen to the sound
from the speakers.
Connect the OUTPUT jacks of this unit to the line input jacks of an
amplifier or receiver with the supplied audio cord.
Notes
÷ Never connect the OUTPUT jacks to the PHONO jacks of the
amplifier or receiver. This may cause damage to the components.
÷ Make sure that the same channels are connected between this unit
and the amplifier or receiver: LEFT to LEFT and RIGHT to RIGHT.
÷ Do not connect the power plug until all connections are complete.
÷ Connect the plugs firmly. Loose connections may cause noise or
malfunction.
Rear panel of this unit
COMPULINK-3
OUTPUT AC POWER CORD
SYNCHRO
LEFT
RIGHT
Audio cord
OUTPUT
LEFT
RIGHT
Amplifier or receiver
Speaker unit
Page 4