Recording - JVC RC-BM5 Instructions Manual

RECORDING

Basic operation
1 Prepare the recording source.
• When recording from the radio
Set to the TUNER mode and tune in a desired
station.
• When recording from a CD
Set to the CD mode and load a CD.
2 Load a blank or erasable cassette.
Use only a type-I normal tape.
3 Press the ¶ REC and 2 PLAY buttons
simultaneously.
To stop recording
Press the § STOP/EJECT button.
The tape also stops when it reaches the end.
Notes:
• It should be noted that it may be unlawful to re-
record pre-recorded tapes, records, or discs without
the consent of the owner of copyright in the sound
or video recording, broadcast or cable program and
in any literary, dramatic, musical, or artistic work
embodied therein.
• In recording, the ALC circuit automatically optimizes
the recording level. Adjustment of the recording level
is unnecessary.
• If a recording you made has excessive noise or static,
the unit may have been too close to a TV which was on
during the recording. Either turn off the TV or increase
the distance between the TV and the unit.
1 2 3
STANDBY
CD POTABLE SYSTEM RC-BM5
2
Using the beat-cut function
When recording an AM broadcast, beats may occur. If
this happens, press the FM MODE/BEAT CUT button
to select the better beat-cut position, "BEAT 01" or
"BEAT 02".
To start recording at the exact moment
1 Press the 8 PAUSE button first, then press the
¶ REC and 2 PLAY buttons simultaneously, thus
entering the record-pause (standby) mode.
2 Press the 8 PAUSE button to release the tape at
the exact moment you want to start recording.
Note:
Do not leave the unit in pause mode for more than a few
minutes. Instead, press the § STOP/EJECT button to
stop the tape.
18