Table of Contents
Advertisement
(2) Mounting procedure
1. Loosen two main body fixing bolts situated at lower front side of the main body,
then remove the mounting plate.
2. Drill four tapping screw holes (φ4 mm) in the main body mounting location.
3. Using the tapping screws attached to the main body, fix the mounting plate to the
desk.
4. Using the two bolts already being removed (in the step 1 above), fix the main body
to the mounting plate.
Top View of Mounted Echo Sounder
Any one of the
two holes shall
be used.
Maintenance space
10
8 – 6 mounting
hole for an M6 tap-
ping screw (four
screws in total)
(Unit: mm)
Advertisement
Table of Contents
