Radio Operations; Listening To The Radio - JVC KD-SH9101 Instructions Manual

RADIO OPERATIONS

Listening to the radio

You can use either automatic searching or manual
searching to tune in to a particular station.
Searching a station automatically:
Auto search
1
Select the band (FM1 – 3, AM).
1 Press SRC (source)
SRC
2 Press and hold SRC for more
AM FM1
3 Within about 5 seconds (while
FM3 FM2
Last received station of the selected band is
tuned in.
Program station (PS)
name (see page 14)
Lights up when receiving an FM stereo broadcast
with sufficient signal strength.
10
D
SRC
DISP
ATT
SEL
repeatedly to select the tuner.
than 1 second.
The band indication on the
display starts flashing.
the band indication is
flashing), press SRC again.
Each time you press the
button, the band changes.
Programme type (PTY)
(see page 14)
1 2 3 4 5
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
2
Start searching a station.
Ex. When the band is FM
When a station is received, searching stops.
To stop searching before a station is received,
press the same button you have pressed for
searching.
T/P
MODE
6 M
Press ¢
to search
stations of higher
frequencies.
4 to search
Press
stations of lower
frequencies.