Viera Link/Q Link Functions - Panasonic Diga DMR-BCT820 Operating Instructions Manual

Convenient functions

VIERA Link/Q Link functions

What is VIERA Link "HDAVI Control"?
VIERA Link "HDAVI Control" is a convenient
function which will link the operations of this unit
and a Panasonic TV (VIERA) or an
amplifier/receiver. You can use this function by
connecting the equipment with the HDMI cable.
See the operating instructions for connected
equipment.
What is Q Link?
Q Link is a convenient function which will link the
operations of this unit and a Panasonic TV
(VIERA). You can use this function by connecting
the equipment with a fully wired 21-pin Scart
cable.
Automatic input switching/
Power on link
(VIERA]Link) (Q]Link)
When the following operations are performed, the
input channel of the TV will be automatically
switched and the screen of this unit will be
displayed. Additionally when the TV is off, the TV
will automatically turn on.
- When play starts on this unit
- When an action that uses DIRECT NAVIGATOR
or FUNCTION MENU etc, is performed
Power off link
(VIERA]Link) (Q]Link)
When you set the TV to standby mode, this unit is
also automatically set to standby mode.
• Power off link function does not work when
recording, copying etc.
82
VQT4G51
Playing music continuously even after
turning off power to the TV
(VIERA]Link)
The following operations make it possible to keep
the power of the unit on and to play music
continuously.
When the unit is directly connected to an
amplifier/receiver.
1 While playing music
Press [OPTION].
2 Select "TV Power Off", then press [OK].
• Sound may be discontinued for several seconds
when the power to the TV is turned off.
• This function is available with the TV that
supports "HDAVI Control 2" or later.
PAUSE LIVE TV
(VIERA]Link)
You can operate this unit with the TV remote
control.
Refer to "PAUSE LIVE TV". (
• This function is available with the TV that
supports "HDAVI Control 3" or later.
Direct TV Recording
(VIERA]Link) (Q]Link)
This function allows you to immediately start
recording the programme that you are viewing on
the TV.
Refer to the TV operating instructions for
operation.
• This function is available with the TV that
supports "HDAVI Control 3" or later.
30)