Registering The External Hdd (Usb Hdd); Connecting The Usb Hdd; Disconnecting The Usb Hdd - Panasonic Diga DMR-BCT820 Operating Instructions Manual

Convenient functions

Registering the external HDD (USB HDD)

If you connect and register a USB HDD, you can
move the titles in the built-in HDD to the
USB HDD, thus saving the capacity in the built-in
HDD.
If you use a USB HDD with this unit, the
USB HDD must first be registered on this unit.
• Registering of a USB HDD will format the
USB HDD and all the content already recorded
will be deleted.
• Up to eight USB HDDs can be registered on this
unit.
• Registered USB HDDs cannot be used with
devices other than this unit.
Regarding the external HDD (USB HDD)
Please use a confirmed USB HDD.
For the latest information on confirmed USB
HDDs, please check the following website.
http://panasonic.jp/support/global/cs/
• Certain non-confirmed USB HDDs cannot be
used with this unit.
• If a problem occurs with the USB HDD, please
contact the manufacturer of the device.
80
VQT4G51

Connecting the USB HDD

Connect this unit with optional USB HDD.
e.g.,
This unit's rear panel
USB HDD
• Only one USB HDD can be connected at the
same time.
• Do not connect additional HDDs using a USB
hub.
• For details about connection method, refer to
the instructions supplied with the USB HDD.

Disconnecting the USB HDD

Please use the following procedure to disconnect.
Disconnecting without following this procedure
may result in the loss of recorded content from
the USB HDD or the internal HDD.
1
Press [FUNCTION MENU].
2
Select "Setup" in "Others", then press [OK].
3
Select "Settings for USB HDD" in "HDD /
Disc / USB HDD", then press [OK].
4
Select "USB HDD Disconnection", then
press [OK].
5
Select "Yes", then press [OK].
6
Disconnect the USB HDD from this unit.