Operation During Recording - Panasonic Diga DMR-BCT820 Operating Instructions Manual

Recording
Recording TV programmes
To convert the recording mode after recording
in DR mode
Refer to "File Conversion". (
To confirm whether the conversion is
completed
Refer to "To confirm whether the conversion is
completed". ( 52)
To cancel a conversion
Refer to "To cancel a "During standby"
conversion". ( 52)
• One recording will terminate when simultaneous recording
is being done and timer recording starts.
• When the programme recorded in DR mode is converted,
teletext will not be recorded.
• Data service will not be recorded.
• Following contents or media cannot be played back while
recording.
- DivX and MKV file
- photo
- USB memory
• Copying cannot be performed while recording.
• When "Automatic Standby after OTR" is set to "On" (
this unit is turned to standby mode if this unit is not
operated for approximately 5 minutes after completing
"Automatic Stop" or "Recording Time".
• When a programme is recorded in encrypted form,
conversion will not start until decryption has finished.
( 33)
• The title before conversion (the title recorded in DR mode)
will be deleted once the conversion is completed.
• Conversion will take about the same time as the recorded
duration.
• When the HDD does not have enough remaining space,
conversion will not start.
• Conversion is stopped when this unit is turned on.
Conversion will start from the beginning again once the unit
is switched to standby mode.
• The conversion will not start if the timer recording is
scheduled within the time required for the conversion.
• When converted, audio content and subtitle will be
converted with the same settings as at the start of
recording.
32
VQT4G51
51)
To check the recording programme
Press [STATUS
e.g., While recording two programmes simultaneously
To stop recording
Press [STOP ∫].
When recording one programme:
If the following screen appears
99),
Select "Yes", then press [OK].
When recording two programmes:
If the following screen appears
1 Select the programme, then press [OK].
2 Select "Yes", then press [OK].

Operation during Recording

].
HDD
Recording programme
REC1/OTR AUTO
displayed on the TV
5 REC2
Recording programme not displayed on the TV
Stop Recording
1
Recording of this programme is in progress.
Stop this recording ?
Yes No
OK
RETURN
Stop Recording
2 recordings are in progress.
Which recording would you like to stop ?
1
2
OK
RETURN