Download Print this page
GE 62191 Installation Manual
GE 62191 Installation Manual

GE 62191 Installation Manual

Ge led wall washer led lighting system

Advertisement

Quick Links

GE
Lighting
GE LED Wall Washer
LED Lighting System

Product Codes

62191, 62192, 62195, 62196, 62199, 62200, 62202, 62203, 62204, 62205, 62206,
62207, 65444, 65445, 65446, 65447, 65448, 65449

BEFORE YOU BEGIN

Read these instructions completely and carefully.
RISK OF ELECTRIC SHOCK
• Turn power off before inspection, installation or removal.
• Properly ground the LED system.
RISK OF FIRE
• Follow all NEC and local codes.
Save These Instructions
This product is intended solely for the use of non-
residential architecture lighting and is not intended for
use in any other application.
imagination at work
WARNING/AVERTISSEMENT
RISQUES DE DÉCHARGES ÉLECTRIQUES
• Coupez l'alimentation avant l'inspection, l'installation ou le déplacement.
• Mettre à terre le système DEL de la façon appropriée.
RISQUES D'INCENDIE
• Respectez tous les codes NEC et codes locaux.
Prepare Electrical Wiring
Electrical Requirements
• Do not use in wet locations.
• The grounding and bonding of the LED system shall
be done in accordance with National Electric Code
(NEC) Article 600.
• Follow all National Electric Codes (NEC) and local codes.
Installation Guide

Advertisement

loading

Summary of Contents for GE 62191

  • Page 1: Product Codes

    Installation Guide Lighting GE LED Wall Washer LED Lighting System Product Codes 62191, 62192, 62195, 62196, 62199, 62200, 62202, 62203, 62204, 62205, 62206, 62207, 65444, 65445, 65446, 65447, 65448, 65449 BEFORE YOU BEGIN Read these instructions completely and carefully. WARNING/AVERTISSEMENT RISK OF ELECTRIC SHOCK RISQUES DE DÉCHARGES ÉLECTRIQUES...
  • Page 2 Components GE LED Wall Washer Fixtures Leader Cable with End Cap (62208, 62211) Mounting track with bracket (65467) UL approved 18-14 AWG (0.82-2.08 mm ) wire connectors or In-Line Splice Connector (75545) #10 (M5) self-tapping flathead screws (Optional) jumper cable (62209: 12 in. /305 mm long, 62210: 48 in./1219 mm long)
  • Page 3 Installation Leader cable Install mounting track inside the Assemble the LED fixture and Connect the leader cable to the wall cavity using a minimum the bracket by pressing them male plug on the first LED fixture. of two #10 (M5) self-tapping together.
  • Page 4: Troubleshooting

    (1- 8 8 8 - 6 9 - 4 3 - 5 33 ) GE Lighting Solutions, LLC is a subsidiary of the General Electric Company. Tetra is a trademark of GE Lighting. The GE brand and logo are trademarks of the General Electric Company.

This manual is also suitable for:

621926219562196621996220062202 ... Show all