Replacing The Back Cover / Battery; Using The Tw700 Without A Sim Card - Takwak tw700 User Manual

Tw700 rugged outdoor navigation device
Table of Contents

Advertisement

Fig. 3: tw700 with back cover open

Replacing the back cover / battery

Make sure that the slot of the large screw is parallel to
the side of the device. A black rubber seal (O ring) is fit-
ted to a groove which runs around the four edges of
takwak tw700 version 1.30
the battery. Make sure that the rubber seal is in the
correct place and has not become dislodged from the
groove or twisted.
Attach the hooks at the bottom of the back cover to
the lugs at the bottom edge of the device, push the
back cover to the bottom of the device and hinge the
back cover down until it is closed.
While pressing down the cover near the large screw,
turn the screw until the slot is parallel to the top of the
device. You should only need to turn the screw by
about 90°.
 To meet the IP57 specification (dust resistent and
waterproof), you must make sure that the back cover
(battery) is correctly closed.

Using the tw700 without a SIM card

The navigation features and walkie talkie can also be
used without a SIM card or in areas without mobile
phone coverage. In this case you are limited to using
maps which are already downloaded on the tw700
and the takwak group feature will not be available.
www.takwak.com
Battery & SIM Card
11

Advertisement

Table of Contents
loading

Table of Contents