Standard Accessories - Hitachi C 6DC Handling Instructions Manual

12. Always hold the handle of the power tool firmly.
Otherwise the counterforce produced may result
in inaccurate and even dangerous operation.
13. Do not use saw blades which are deformed or
cracked.
14. Do not use saw blades made of high speed steel.
15. Do not use saw blades which do not comply with
the characteristics specified in these instructions.
16. Do not stop the saw blades by lateral pressure
on the disc.
17. Always keep the saw blades sharp.
18. Ensure that the safety cover moves smoothly and
freely.
19. Never use the circular saw with its safety cover
fixed in the open position.
SPECIFICATIONS
POWER TOOL
Model
No-load speed
Capacity Cutting depth
Rechargeable battery
Light bulb
Weight
CHARGER
Model
Charging time (at 20°C)
Charging voltage
Weight
NOTE: The charging time may vary according to ambient temperature and power source voltage.

STANDARD ACCESSORIES

C6DC (BFK)
Standard accessories are subject to change without notice.
90°
45°
EB1820, EB18B
1
1 Saw Blade (mounted on tool) ................................................................................. 1
2 Box Wrench ................................................................................................................. 1
3 Guide ............................................................................................................................. 1
4 Charger .......................................................................................................................... 1
5 Plastic case ................................................................................................................... 1
20. Ensure that the retraction mechanism of the guard
system operates correctly.
21. Never operate the circular saw with the saw blade
turned upward to the side.
22. Ensure that the material is free of foreign matters
such as nails.
23. For model C6DC, the saw blades range should be
from 165 mm to 160 mm.
24. Be careful of brake kickback.
This circular saw features an electric brake that
functions when the switch is released. As there
is somke kickback when the brake functions, be
sure to hold the main body securely.
Ni-Cd battery, 18V
UC24YF
Approx. 60 min.
7.2 – 24V
1.0 Kg
3
2
C6DC
3400/min.
57 mm
40 mm
12V, 5W
3.3 Kg
UC24YFA
Approx. 50 min.
7.2 – 24V
0.6 Kg
4
5
3