JVC KW-AVX716 Instructions Manual page 170

Activating/deactivating TA/PTY
Standby Reception
TA Standby Reception
Press on the monitor panel to
activate.
The unit will temporarily switch to
Traffic Announcement (TA) if available,
from any source other than AM.
• The volume changes to the preset
TA volume level if the current level is
lower than the preset level (☞ page
54).
Not yet activated. Tune in to another
station providing the Radio Data
System signals.
Press to deactivate.
PTY Standby Reception
To activate, display <AV Menu>
screen, press [Mode], then press
[On] for <PTy Standby>. (☞ next
column)
The unit will temporarily switch to
your favorite PTY programme from any
source other than AM.
Not yet activated. Tune in to another
station providing the Radio Data
System signals.
To deactivate, press [Off] for <PTy
Standby> in step 3 on the next
column.
• When a DAB tuner is connected, TA Standby/PTY
Standby Reception also works for the DAB tuner and
searches for the services.
To activate PTY Standby Reception
1
Press [AV MENU].
2
Press [Mode].
Indicator
3
TP
Lights up
PTY Standby Reception is now activated for PTY
code <News>: the initial setting.
Flashes
You can easily activate or deactivate the PTY
Goes off
Standby Reception by pressing [SHORT CUT] on the
touch panel, then...
Indicator
PTY
Lights up
Flashes
Goes off
14
☞ page 48
☞ page 12