Table of Contents
Advertisement
1
CLOCK H
CLOCK M
SCM LINK
LEVEL
DIMMER
AREA
B. SKIP
*
LINE IN
* Displayed only when one of the following sources is selected — FM, AM and tape.
• Press SEL (select) when the setting is complete.
Canceling Advanced SCM
You can cancel the Advanced SCM (Sound Control Memory), and unlink the sound modes
and the playback sources.
When shipped from the factory, a different sound mode can be stored in memory for each
source so that you can change the sound modes simply by changing the sources.
• LINK ON:
Advanced SCM (different sound modes for different sources)
• LINK OFF: Conventional SCM (one sound mode for all sources)
1. Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears
on the display.
2. Select "SCM LINK" with
3. Select the desired mode with the control dial.
The SCM LINK mode changes as follows:
Selecting the level display
You can select the level display according to your preference.
When shipped from the factory, "AUDIO 2" is selected.
• AUDIO 1: Shows the audio level indicator and the equalization pattern indicator.
• AUDIO 2: Alternates "AUDIO 1" setting and illumination display.
• OFF:
Erases the audio level indicator and the equalization pattern indicator.
1. Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears
on the display.
2. Select "LEVEL" with
3. Select the desired mode with the control dial.
The level display setting changes as follows:
2
Select.
Hour adjustment
Minute adjustment
Sound control
memory linkage
Level display
Dimmer
Channel interval
Blank skip
External component
¢ or
4.
¢ or
4.
AUDIO 1
3
Back
Advance
Advance
Back
LINK OFF
LINK ON
AUDIO 1
AUDIO 2
OFF
AUTO
OFF
ON
AREA US
AREA EU
OFF
ON
CHANGER
LINE IN
LINK ON
AUDIO 2
Factory-preset
settings
Set.
0:00
LINK ON
AUDIO 2
AUTO
AREA US
OFF
CHANGER
LINK OFF
OFF
See
page
19
below
below
22
9
13
28
21
Advertisement
Table of Contents
