Storing Your Own Sound Adjustments - JVC Instructions Instruction Manual

Storing your own sound adjustments

You can adjust the sound modes (BEAT, SOFT, POP: see page 16) to your preference and
store your own adjustments in memory.
2
3
1
Within
5 seconds
2
LOUD
Within
5 seconds
3
Within
5 seconds
4
5
Repeat the same procedure to store other settings.
To reset to the factory settings
Repeat the same procedure and reassign the preset values listed in the table on page 16.
18
2 1,4
SCM
Call up the sound mode you want to adjust.
See page 16 for details.
To adjust the bass or treble sound level
Select "BAS" or "TRE."
To turn on or off the loudness function
See page 15 for details.
Adjust the bass or treble level.
See page 14 for details.
Press and hold SCM (Sound Control Memory)
SCM
until the sound mode you have selected
flashes on the display.
Your setting is stored in memory.