Basic Operations On The Monitor Panel - JVC KW-ADV793 Instructions Manual

Basic operations on the monitor panel

1
Resets the unit. (
2
• Turns on the power.
• Attenuates the sound.
• Turns off the power. (Hold)
3
• Changes the display information.
– Each time you press DISP, the display changes
to show the various information.
• Available display information varies among
the playback sources.
– The following screens are displayed only when
they are ready:
• Dual play screen (only for KW-AVX838/KW-
AVX830) (
• Navigation screen (
4
• Adjusts the audio volume.
– You can also adjust the volume by moving
your finger on the touch panel as illustrated.
Caution on volume setting:
Digital devices (CD/USB) produce very little
noise compared with other sources. Lower
the volume before playing these digital
sources to avoid damaging the speakers by
sudden increase of the output level.
Screen (touch panel)
3)
28)
27)
5
Remote sensor
6
Prox./Motion sensor (
7
• Displays <AV MENU> screen. (
8
• Selects the source.
• Turns on the power.
9
• Change the source to "USB" or "iPod."
• Selects the iPod control mode. (Hold) (
p
• Displays <Open/Tilt> screen. ( See below.)
• Ejects the disc and display <Open/Tilt>
screen. (Hold)
• Closes the monitor panel if pressed when the
panel is open.
<Open/Tilt> screen
Open/Tilt
Open
Eject
Close
[Open] Opens the monitor panel.
[Eject] Ejects the disc.
[Close] Closes the monitor panel.
[Tilt +/–] Tilts the monitor panel.
[Detach] To detach the monitor panel.
(
[Exit] Goes back to the current source
screen.
6
Monitor panel
8)
7)
Tilt +
Tilt –
Exit
Detach
5)
19)