Automatic Tape Type Detection; Prohibiting Cassette Ejection - JVC KS-FX840R Instruction Manual

Jvc cassette receiver instruction manual
Hide thumbs Also See for KS-FX840R:
Table of Contents

Advertisement

Available languages

Available languages

To stop play and eject the cassette
Press 0.
Tape play stops and the cassette automatically ejects from the cassette compartment.
If you change the source to FM, AM, CD changer or AUX, the tape play also stops (without
ejecting the cassette this time).
• You can also eject the cassette with the unit turned off.
To fast-forward and rewind a tape
To stop fast forward and rewind at any position on the tape, press TAPE 2 3 .
Tape play starts from that position on the tape.
Note:
While fast-forwarding or rewinding, this unit changes the source to the tuner. (Tuner Call Play)
If you do not want to use Tuner Call Play, you can cancel this function. See page 20 for details.

Automatic tape type detection

With the Automatic Tape Type Detection mechanism provided for this unit, you can listen to
type I, II and IV tapes without changing any settings.

Prohibiting cassette ejection

You can prohibit the cassette ejection and can "lock" a cassette in the cassette compartment.
Press and hold TAPE 2 3 and
the display for about 5 seconds, and the cassette is "locked."
To cancel the prohibition and "unlock" the cassette, press and hold TAPE 2 3 and
for more than 2 seconds again. "EJECT OK" flashes for about 5 seconds, and this
time the cassette is "unlocked."
18
¢ for more than 1 second to fast-forward the tape.
• Press
When the tape reaches its end, the tape is reversed and playback
starts from the beginning of the other side.
• Press 4
for more than 1 second to rewind the tape.
When the tape reaches its end, playback of the same side starts.
for more than 2 seconds. "NO EJECT" flashes on

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ks-fx940r

Table of Contents