Martin Atomic Colors User Manual page 18

Summary of control functions:
Setting Description
DMX address Sets the unit's DMX
address
Fan speed Sets the fan speed
'Gel Saver' Switches on/off the gel
saving mode.
'speed' Sets the scrolling
speed
'disPlay'
Switches display on/off
Light Allows light output to
activated control the cooling
Fans fans.
reSet Resets the unit to the
default settings.
Atomic Colors User Manual
'UP' 'DOWN'
Press or '
decrement the value, hold down the
'DOWN'
for fast forward/reverse.
Note: -
The unit uses 1, or 2 DMX channels depending on
which control mode it is set for (see below).
(See also, DMX addressing instructions)
There are four fan speeds, 1 is the slowest, 4 is the
fastest and a remote option. The unit uses 1 DMX
channel when a numbered fan speed is selected.
Selecting Fnr automatically places the unit in two
DMX channel mode, and allows the fan speed to be
controlled by the second DMX channel.
'UP' 'DOWN'
Press or
decrement the value,
(See also, fan speed instructions)
'UP' 'DOWN'
Press or
(1) and off (0).
Note: -
Ensure that the gel is centered (by channel/DMX
value) before implementing this mode, or the next
color may show through during the gel saver mode.
(See also, gel saver mode instructions)
There are two scrolling speeds. 1 is the normal
speed, 2 is the fast speed.
'DOWN'
Press
decrement the value,
(See also, gel scroll speed instructions)
'UP' 'DOWN'
Press or
off (0).
Display will re-activate when any button is pressed.
(See also, display mode instructions)
'UP' 'DOWN'
Press or
(1) and off (0).
(See also, fan mode instructions)
While holding down
'UP'
press the button.
(See also, reset instructions)
Operating the unit
Actions required
once to increment/
'UP'
or
once to increment/
once to switch between on
'UP'
or once to increment/
to switch between on (1) and
once to switch between on
'ACTION/RECALL'
Display
button,
18