Martin Atomic Colors User Manual page 15

Atomic colors
Table of Contents

Advertisement

Monitor Display
If left undisturbed for 5-7 seconds, the display will revert to 'Monitor Mode'
The left hand vertical bar indicates that there is power (24V DC) at the unit.
The middle vertical bar indicates that there is data (DMX) at the unit.
The horizontal bars indicate the data signal level (DMX) at the unit.
Display Flip
The display-viewing angle can be flipped through 180º by pressing and holding the
button, then pressing the
'ACTION/RECALL'
Display Blank
The display can be set to auto-blackout after short time. This is selected through the mode menu.
(See later in this section)
Reset
If the
'ACTION/RECALL'
1 second, the unit will reset to the factory default settings and the display will
show rES for 1 second.
This feature is particularly useful when the units are used in many different
configurations/ or shows.
Atomic Colors User Manual
'DOWN'
button is depressed, and the
Operating the unit
button.
button held down for
'UP'
15

Advertisement

Table of Contents
loading

Table of Contents