Manual Preset - JVC KS-FX280 Instructions Manual

Jvc cassette receiver instructions
Table of Contents

Advertisement

2
Press and hold the both buttons for
more than 2 seconds.
"SSM" appears, then disappears when automatic
preset is over.
Local FM stations with the strongest signals are
searched and stored automatically in the band
number you have selected (FM1, FM2 or FM3).
These stations are preset in the number buttons —
No. 1 (lowest frequency) to No. 6 (highest
frequency).
When automatic preset is over, the station stored
in number button 1 will be automatically tuned in.

Manual preset

You can preset up to 6 stations in each band (FM1,
FM2, FM3 and AM) manually.
Ex: Storing an FM station of 88.3 MHz into the
preset number 1 of the FM1 band
1
Select the FM1 band.
FM /AM
2
Tune into a station of 88.3 MHz.
See page 8 to tune into a station.
3
Press and hold the button for more
than 2 seconds.
Preset number "P1" starts flashing for a while.
4
Repeat the above procedure to store
other station into other preset
numbers.
Notes:
• A previously preset station is erased when a new station
is stored in the same preset number.
• Preset stations are erased when the power supply to
the memory circuit is interrupted (for example, during
battery replacement). If this occurs, preset the stations
again.
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ks-fx280j

Table of Contents