Thyro-A may only be transported, installed, connected, commissioned, maintained
and operated by specialists in command of the respective applicable safety and in-
stallation regulations. All work must be monitored by the responsible specialist per-
The Thyristor Power Controller may only be employed in the sense of
its purpose of use (see the section of the chapter on safety instructions
under the same name), otherwise hazards to persons (e.g. electric
shocks, burns) and systems (e.g. overload) may occur.
Any unauthorized reconstruction and modification of Thyro-A, use of spare and ex-
change parts not approved by AEG SVS as well as any other use of Thyro-A is not
The person responsible for the system must ensure that:
- safety and operating instructions are available and observed,
- operating conditions and specifications are observed,
- protective installations are used,
- maintenance personnel are immediately notified or Thyro-A is immediately put out
of commission if abnormal voltages or noises, higher temperatures, vibrations or si-
milar occur to determine the causes.
These operating instructions contain all information required by specialists for the
use of Thyro-A. Additional information and notes for unqualified persons and for the
use of Thyro-A outside of industrial installations are not contained in these operating
The warranty obligation of the manufacturer applies only if these operating instruc-
tions are observed.
No liability is assumed when using Thyro-A for applications not provided for by the
manufacturer. The responsibility for the necessary measures to avoid hazards to per-
sons and property is borne by the operator or the user. In case of complaints on
Thyro-A, please notify us immediately stating:
Type name, production number, complaint, ambient conditions, operating mode,
duration of use.