Maytag REFRIGERATOR Installation Instructions Manual page 7

24Q Edwards Street. S E
Cleveland, Tennessee 37311
Tei:423-,q2-3333
Fax: _ 23-47_-_7_8
C
This allows movement for the refrigerator without disconnecting the tubing. Other routing
methods are shown below.
4. Slide the brass nut and sleeve onto the 1/4" copper tubing. Insert the end of the tubing
into the saddle valve as far as it will go and tighten the nut with an adjustable wrench.
Cold Water
f Line
Pipe C lamps
/
e'/ Brass Nut
Manual _p
Shut-off er Tubing
Valve
Connecting WaterLineTo SaddleValve
5. Turn ON the main water supply and flush out the water pipe until water runs clear. At
the same time, check for leaks at the saddle valve. After the water has cleared, flush out the
tubing from the saddle valve to the water valve into a bucket by turning the saddle valve on.
When the water has cleared, turn off the saddle valve.
6. Remove the small bag of parts from the inside of the crisper drawer.
7. Working at the rear of the cabinet, remove the protective cap from the water valve inlet.
8. Slide the brass nut and sleeve onto the copper tubing. Insert the end of the tubing into the
water valve inlet as far as it will go and tighten the nut with an adjustable wrench.