Placement Of Burner Heads And Caps; Placement Of Burner Grates - Electrolux Gas Cooktop Use & Care Manual

PLACEMENT OF BURNER HEADS AND CAPS

Place burner head over each gas orifice, matching the head with the
orifice size. Be careful not to damage the electrode while placing
the head over the orifice. Make sure electrode fits correctly into slot in
burner head. Place a burner cap on each burner head, matching the cap
size to the head size. The cap for each burner has an inner locating ring
which centers the cap correctly on the burner head. Be sure that all the
burner caps and burner heads are correctly placed BEFORE using your
appliance.
Make sure each burner cap is properly aligned and level.
Turn the burner on to determine if it will light. If the burner does not light,
contact a Service Center. Do not service the sealed burner yourself.

PLACEMENT OF BURNER GRATES

Place grates on the Ceramic Glass Cooktop. Be sure they
are right located inside the stainless steel frame.
ATTENTION: Do not slide the grates on the stainless steel
frame, doing so can damage the surface.
Surface Cooking
9
Burner Cap
Burner
Gas
Head
Opening
Electrode